aerial roof measurement

Aerial Roof Measurements Are Now Easier

Aerial Measurement Technology

It extracts measurements that may have at an accuracy rate of 95% or higher. Contractors benefit from the time savings that come with not having to visit the property, as well as the added safety: it’s possible to gather the measurement with no climbing.

What is aerial roof measurement report?

The Roof Measurement Report provides a detailed analysis of your roof layout and all the critical dimensions. … This report saves your time and enables accurate roof estimates for a roof repair or replacement. This is a professional grade report used for use by licensed roofing contractors or insurance companies

How do I figure out how many square My roof is?

Roof surfaces are measured in “squares”. A roofing square is equal to 100 square feet of the roof. To determine the number of squares on the gable roof example in this post, divide its total of 2400 square feet by 100 (2400 ÷ 100 = 24).
 

Can you measure a roof from the ground?

If you’re planning work on a roof and don’t have the building plans, taking preliminary measurements from the ground allows you to approximate the roof area and estimate some costs. … But, you can measure a gable or flat roof from the ground with the help of an assistant.
 

How do you measure a roof for metal roofing?

Determine the length of the metal panels needed for one side of your roof by measuring from the fascia board (the board attached to your roof joists) to the ridge (the peak) of the roof. For example, your roof could measure 12 feet to its peak. This number will tell you the total length of metal panels needed.
 

How do I estimate roofing costs?

According to HomeAdvisor, the typical range for roof replacement costs is between $5,100 and $10,000, but roof replacement can be as low as $1,200 or as high as $30,000. Many roofing companies will charge between $3.50 and $5.00 per square foot.

Leave A Comment

Your email address will not be published. Required fields are marked *