Can I get roof measurements from Google Maps? How do you measure a roof without measuring it?

WHAT IS AERIAL ROOF MEASUREMENTS?

Measure the width and length of each plane of the roof (including dormers), and then multiply those numbers to get the correct figure for the square footage of that area. Note any skylights, chimneys or other parts of the roof that would not require materials so you can subtract those measurements from your total area.

Why choose our aerial roof measurements?

We’re dedicated to saving your time, reducing your cost of business, improving your customer service, and profitability by providing your business with automated Aerial Roof Measurements. Our reports are unique because They are just as accurate as on-site measurements, Our valuable customers confirm this statement.

What is satellite roof measurement?

Satellite Roof Measurement are measurements taken from an aerial view of your home. The measurements are then calculated with software. You can actually do this on google maps with the aerial view of the house. There is even a measuring tool that can tell you how many feet by how many feet the roof is.
Aerial Estimation is the most complete source for all your Satellite Roof Measurements. We know what contractors want. Roof Measurements including Area, Rakes, Ridges, Hips and Valleys, and every edge is separately measured and identified.

How do you measure a roof for a light?

The most accurate method: Use a measuring tape.

Pretty simple, measure along the roofline either directly at the edge between two people on ladders, along the ground under the roofline, or while walking along the ground with a rolling measure under the roofline edge.

How do you measure a roof edge?

Measure out from the face of the wall below the fascia or rafter tails to a point that aligns with the outer edge of the roof. Multiply this measurement by the length of the roof from end to end, and add this to the first result. Double the result to determine the total area of the roof at both sides.

How are holiday lights measured?

The distance between individual lights is all over the map. Take a tape measure with you to determine the spacing between lights, and buy sets that come with less than 12 inches between bulbs. Typically, larger bulbs, like chunky C7s or C9s for the roof, look best when the lights are between 6 and 10 inches apart.

What is the difference between C9 and C7 bulbs?

The Main Difference: Size!

C7 Bulbs are much smaller than the larger C9 Bulb. C-9’s are longer, wider, and fit into a bigger socket. As you can see from the photographs above, the C7 Bulb is usually 2-1/8in in length and 7/8in in width. In comparison, the C9 Bulb measures 2-7/8in in length and 1-1/8in in width.

Leave A Comment

You must be logged in to post a comment