https://skyroofmeasure.com/

How do you measure a roof for satellites?

In most cases, satellite and aerial roof measurement technology is 99% accurate, if you follow a few simple rules. Achieving accurate roof measurements manually isn’t any different. A manual roof takeoff by one roofer can easily vary from that of another.
Just measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane. Simply add the square footage of each of the planes together to derive the total square footage of your roof.
To find your roof’s total square footage: Measure the length and width of each plane on the roof (including dormers) then multiply length times width. Add the square footage of each of the planes together.
For a 1500 square foot house, you will need approximately 19 squares or 57 bundles or 1653 pieces of 3-tab standard-sized shingles (12 inch by 36 inch) when overhangs is 1 feet and roof slope is 4/12.
The average size of 12×12 shed roof is 3 squares, which typically requires 9 bundles of three-tab asphalt shingles or any other starter strips.
How many shingles do I need to protect my roof? The surface area of your roof will affect the number of bundles or squares you need. A 2,000 square foot roof requires 20 squares or 60 bundles.
Assuming your trailer’s outside walls are 10 feet high, you’ll have 140-square-foot trailer ends and 700-square-foot sides, for a total of 1,680 square feet. The cost to put in new vinyl siding on a 14 x 70 trailer cost ranges, at the time of publication, would start just above $3,000 and climb to $12,000 or more.
5/5
One Click Roofing Estimates

Measure Roof From Satellite Free

The good news is there is a way to measure your roof in a safe and accurate way, all from the comfort of your home: use Google Earth. With just a few clicks, you can search for any address, get a bird’s eye view of your roof, and get the roofing measurements that you need.
To do this, measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane. Finally, calculate your roof’s total square footage by simply adding the square footage of each of the planes together.

Sky Roof Measure provides industry leading takeoff and  Roof  estimating Reports for professional construction contractors. Please Email : [email protected]

How many shingles do i need for a 12×12 shed:- for a 12×12 shed roof, you will need approximately 3 squares or 9 bundles or 261 pieces of three tab strip standard-sized shingles (12 inch by 36 inch) when overhangs is 1 feet and roof slope is 6/12.
How many bundles of shingles do i need for 1200 square feet:- for 1200 square feet or 12 squares roof, you will need approximately 36 bundles of standard size 3-tab shingles (12×3 = 36 bundles). Thus, for a 1200 square foot gable roof, you would need 36 bundles of shingles plus 10% of ridge, starter and wastages.

Cost of Shingles

Prices are based on a cost of around $30 to $35 per bundle of asphalt three-tab shingles or about $90 to $100 per square

By saying this, you might already realize that the difference between a 30-year shingle and a 50-year one is how long the product is guaranteed to last. In other words, 30-year architectural shingles are covered by the manufacturer from any unforeseen defects that could occur once the shingles are installed.

Looking for a Roof Measurement Report?

Please fill out the form below -

Satellite Roof Measurement

Satellite Roof Measurement

Are satellite roofing estimates accurate?

In most cases, satellite and aerial roof measurement technology is 99% accurate, if you follow a few simple rules. Achieving accurate roof measurements manually isn’t any different. A manual roof takeoff by one roofer can easily vary from that of another.
 
SKY Roof Measure will reduce the need for on-site visits, giving roofing contractors a cost-saving, efficient way to provide excellent service to their customers. Other, comparable roof measurement products can take several days to generate a full report of roof attributes and can cost upwards of $100 per report or expensive monthly subscription fees. Roof’s new tool is completely free. 
  1. On your computer, open Google Earth.
  2. Search for a place, or select a location on the globe.
  3. On the left, click Measure. . …
  4. Click the map to set measurement points.
  5. To remove a point, on the right, click Undo .
  6. To complete your line measurement, double-click on your last point, or click Done .

Sky Roof Measure provides industry leading takeoff and  Roof Estimating Reports for professional construction contractors. Please Email : [email protected]

Roof Dimensions Google Maps
Just measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane. Simply add the square footage of each of the planes together to derive the total square footage of your roof. For example, this flat roof has one roof plane.

Satellite Roof Measurements: Features of a Roof Report

  • Accurate Roof Pitch Measurements
  • Roof Measurements including AreaRakesRidgesHips and Valleys, and every edge is separately measured and identified.
  • CAD style drawings with colored lines identifying every type of roof edge
  • Online access to your Roof Reports for your Employees, Subs and Suppliers with no software to install
  • Multiple image providers for over 98% coverage of the USA & Canada
  • Also supports file formats such as XML,RXF,DXF/DWG AND WRL

Sky Roof Measure provides industry leading takeoff and  Roof Estimating Reports for professional construction contractors. Please Email : [email protected]

aerial roof measurement

We Are Specialists

Our Satellite Roof Measurement Technologies produces roof charts wherein we take most extreme consideration of the multitude of subtleties like deterrents on roofs, accurate pitch estimation by seeing various appearances on Aerial Photos (East, West, North, and South) additionally lengths of the Eaves, hips, valleys, rakes, overhang, the space of every aspect and absolute space of the roof. Additionally, significance is given while appointing line ID as this is pivotal in planning roof outlines. For setting up the roof graphs we just need the location of the structure and we can give you the roof outline of the structure with definite precision. The estimations are taken from satellite and ethereal pictures that are regularly as, or more precise, than estimations taken from the site. We are comfortable working with Google Earth, BING, and Pictometry picture sources. Our twofold check quality methodology helps us giving quality yield to our clients.

The good news is there is a way to measure your roof in a safe and accurate way, all from the comfort of your home: use Google Earth. With just a few clicks, you can search for any address, get a bird’s eye view of your roof, and get the roofing measurements that you need.
https://skyroofmeasure.com/

How to Get Your Satellite Roof Measurements

You’re a few simple steps away from your aerial roof measurements (and a better back!):

    • Enter Your Details: Give us your name, email, and phone number so we can contact you.
    • Enter Your Address: Let us know which roof to measure.
    • Leave Notes: Tell us to exclude the garage or anything else we should know before sending your measurements.
  • Confirm Your Address: Hey, we just want to know we’re measuring the right house!

That’s it! Just proceed to the payment page (if necessary), and you’ll get your measurements instantly. See, wasn’t that way better than spending all day on the roof in the hot sun?

From there, you’ll create your free toolbox account where you’ll have access to your measurements and a ton of tools to make your roof project easier, cheaper, and faster. Or Just have a CLIK on our Email [email protected]

Looking for a Roof Measurement Report?

Please fill out the form below -

Can I get roof measurements from Google Maps? How do you measure a roof without measuring it?

WHAT IS AERIAL ROOF MEASUREMENTS?

Measure the width and length of each plane of the roof (including dormers), and then multiply those numbers to get the correct figure for the square footage of that area. Note any skylights, chimneys or other parts of the roof that would not require materials so you can subtract those measurements from your total area.

Why choose our aerial roof measurements?

We’re dedicated to saving your time, reducing your cost of business, improving your customer service, and profitability by providing your business with automated Aerial Roof Measurements. Our reports are unique because They are just as accurate as on-site measurements, Our valuable customers confirm this statement.

What is satellite roof measurement?

Satellite Roof Measurement are measurements taken from an aerial view of your home. The measurements are then calculated with software. You can actually do this on google maps with the aerial view of the house. There is even a measuring tool that can tell you how many feet by how many feet the roof is.
Aerial Estimation is the most complete source for all your Satellite Roof Measurements. We know what contractors want. Roof Measurements including Area, Rakes, Ridges, Hips and Valleys, and every edge is separately measured and identified.

How do you measure a roof for a light?

The most accurate method: Use a measuring tape.

Pretty simple, measure along the roofline either directly at the edge between two people on ladders, along the ground under the roofline, or while walking along the ground with a rolling measure under the roofline edge.

How do you measure a roof edge?

Measure out from the face of the wall below the fascia or rafter tails to a point that aligns with the outer edge of the roof. Multiply this measurement by the length of the roof from end to end, and add this to the first result. Double the result to determine the total area of the roof at both sides.

How are holiday lights measured?

The distance between individual lights is all over the map. Take a tape measure with you to determine the spacing between lights, and buy sets that come with less than 12 inches between bulbs. Typically, larger bulbs, like chunky C7s or C9s for the roof, look best when the lights are between 6 and 10 inches apart.

What is the difference between C9 and C7 bulbs?

The Main Difference: Size!

C7 Bulbs are much smaller than the larger C9 Bulb. C-9’s are longer, wider, and fit into a bigger socket. As you can see from the photographs above, the C7 Bulb is usually 2-1/8in in length and 7/8in in width. In comparison, the C9 Bulb measures 2-7/8in in length and 1-1/8in in width.
ScreenshotGoogleEarth1-1

Roof Measurement Report for RESIDENTIAL Roofs

The Roof Measurement Report provides a detailed analysis of your roof layout and all the critical dimensions. Our full color report provides the detailed lengths, pitch and areas of every surface plane and edge. This report saves your time and enables accurate roof estimates for a roof repair or replacement. This is a professional grade report used for use by licensed roofing contractors or insurance companies. You will receive the report in .PDF format by email within 1-3 days.

How to Manually Measure a Roof

To manually measure a roof without the help of aerial measurement reports, you must visit a job site and climb onto the roof to take precise roofing measurements by hand. Here are the 6 steps to get a manual roofing measurement.

 
  1. Measure the width and length of each plane of the roof (including dormers), and then multiply those numbers to get the correct figure for the square footage of that area.
    Example: Plane 1 (A x B): 50’ x 20’ = 1000 sq ft
    Plane 2 (A x C): 50’ x 20’ = 1000 sq ft
  2. Note any skylights, chimneys or other parts of the roof that would not require materials. You can subtract those measurements from your total area.
  3. Add together the calculated square footage of each surface to get the figure for total square footage of the roof.
    Example: Plane 1 (1000 sq ft) + Plane 2 (1000 sq ft) = 2000 sq ft
aerial roof measurement
  1. After determining the total square footage of the roof, you must calculate the pitch of the roof. Measure the vertical distance (rise) over a 12 inch horizontal segment (run).
    Example: The rise of this roof is 5”.
  2. Write down these numbers as the vertical measurement listed first and the horizontal measurement recorded second so you can find rise over run.
    Example: The rise over run of this roof is 5” over 12”.
  3. When you have the total square footage and rise over run of the roof, you can calculate the roof squares to determine how much materials are needed to cover the roof. To calculate the number of squares on a roof, you need to divide its total square feet by 100.
    Example: 1000 sq ft / 100 = 10 squares

With those roofing measurement figures, you can then estimate the roofing supplies needed for a job.

How do you find the sq ft of a roof?

To find your roof’s total square footage:
  1. Measure the length and width of each plane on the roof (including dormers) then multiply length times width.
  2. Add the square footage of each of the planes together.

How do I estimate roofing costs?

According to Sky Roof Measure, the typical range for roof replacement costs is between $5,100 and $10,000, but roof replacement can be as low as $1,200 or as high as $30,000. Many roofing companies will charge between $3.50 and $5.00 per square foot.

What is a fair price per square for roofing?

A replacement could be as low as $1,200 or as high as $30,000. With that said, on average, most roofing companies will charge somewhere between $3.50 and $5.50 per square foot, or $350 to $550 per square (100 square feet) to install or replace an asphalt shingle roof.

How much does it cost to tear off and replace a roof?

Most homeowners can expect the average cost to tear off and replace a roof to be around $12,000 to $15,000. This price is based on a home with 3 bedrooms, 2 bathrooms, a walkable roof pitch, a little roof complexity, and architectural asphalt shingles.

What is the cheapest way to replace a roof?

While asphalt is the cheapest roofing material, there are 3 different types of asphalt shingles that vary in price and affect how much you’ll spend on your roof replacement. 3-tab shingles are the cheapest of the 3 types of asphalt shingles and are a great option for a tight budget.

How many times can you overlay a roof?

Installing new roof shingles over old effectively doubles the weight of the roofing, so you have to make sure your roof structure can handle the extra load. That’s also why building codes commonly limit re-roofing to no more than two layers.
 
drone

The Benefits of Satellite Roof Measurements

Are satellite roofing estimates accurate?

Get Accurate Measurements AND Estimates in Minutes: Satellites are more accurate than the most experienced contractor’s hands. You’ll get EXACT measurements of your roof with no human error. We’ll even provide an estimate for costs based on the average roofing materials.

How do you measure a roof on Google Earth?

  1. On your computer, open Google Earth.
  2. Search for a place, or select a location on the globe.
  3. On the left, click Measure. . …
  4. Click the map to set measurement points.
  5. To remove a point, on the right, click Undo .
  6. To complete your line measurement, double-click on your last point, or click Done .

roof quotes online

Can drones measure roofs?

Drones present a unique opportunity for getting a clear view of your rooftop and allowing you to get precise roof measurements. A variety of roof measuring applications and programs already take advantage of high-resolution drone imagery to get accurate roof measurements.

How much should I charge for drone pictures?

How much does drone photography cost? The national average cost for aerial or drone photography is $250–$350. Length of the photography shoot, resolution, and services performed all affect the total cost of aerial photography and videography. A shoot longer than 90 minutes may add $50 – $70 per additional hour.

Roof Sheet Calculator

  1. Take Roof Sheet Measurements.
  2. Calculate Carport or Structure Total m² Area. Enter Width and Length(water flow direction) in meters eg. 5.35m = 5.35. Enter Width of Carport : m. Enter Length of Carport (Water Flow Direction): m. Total m² Area =
  3. Calculate Number of Roof Sheets Required.

The formula for weight calculation is:
  1. l = length in mm.
  2. w = width in mm.
  3. t = thickness in mm.
  4. η = Specific material density ( e.g.: steel = 7.85 kg / dm³)

How do I get an accurate roof measurement?

Measure the base area of your property

That will be the roof base width. Then, measure the distance of the other side of the structure from the edge of the eave to the other. That will be the roof base length. Multiply those figures together to get an estimate of the base area for the roof structure. Please Follow Our Working process!

How do roofing estimates compare?

Check out these four tips to help you choose the right roofer to work on your home:
  • Compare Roofers. No two roofers are made alike. …
  • Ask About the Materials Each Roofer Will Use. Your estimate should go into detail about the materials involved. …
  • Analyze Workmanship and Material Warranties.

Looking For a Roof Estimating Report?