Estimate Roof Size

Satellite Roof Measurements free

Sky Roof Measure provides industry leading takeoff and  Roof Estimating Reports for professional construction contractors. Please Email : [email protected]

In most cases, satellite and aerial roof measurement technology is 99% accurate, if you follow a few simple rules. Achieving accurate roof measurements manually isn’t any different. A manual roof takeoff by one roofer can easily vary from that of another.
Multiply your house length by your house width to get the area. (For example, 40 feet x 30 feet = 1,200 square feet.) Next, multiply the area by your roof’s pitch. (1,200 x 1.05 = 1,260 square feet.)
  1. Unroll the blueprint onto a flat surface. 
  2. Find the scale of the drawing. 
  3. Choose a scaled ruler that accurately matches the scale of the drawing. 
  4. Lay the proper scale next to the item on the drawing and take the measurement.
Method
  1. Find out what the scale on the drawing is.
  2. Measure the distance on the drawing using a ruler (or count the number of squares, if that’s an option).
  3. Multiply the distance you measure by the scale to give the distance in real life.

Looking For a Roof Estimating Report?

Please fill out the form below -

Sky Roof Measure provides industry leading takeoff and  Roof Estimating Reports for professional construction contractors. Please Email : [email protected]

For an easy up and over, walkable gable roof, you’ll multiply the footprint of the roof by 1.3 to get the square footage of your roof. For a hip roof with a low slope, you’ll multiply the footprint of the roof by 1.4 to get the square footage of your roof.
For a 1500 square foot house, you will need approximately 19 squares or 57 bundles or 1653 pieces of 3-tab standard-sized shingles (12 inch by 36 inch) when overhangs is 1 feet and roof slope is 4/12.
 
Roof Dimensions Google Maps

Roof Dimensions Google Maps

  1. On your computer, open Google Earth.
  2. Search for a place, or select a location on the globe.
  3. On the left, click Measure. . …
  4. Click the map to set measurement points.
  5. To remove a point, on the right, click Undo .
  6. To complete your line measurement, double-click on your last point, or click Done .
Measure distances and areas in Google Earth
Measure distance between points
  1. On your computer, open Google Maps.
  2. Right-click on your starting point.
  3. Select Measure distance.
  4. To create a path to measure, click anywhere on the map. To add another point, click anywhere on the map. …
  5. When finished, on the card at the bottom, click Close .

Sky Roof Measure provides industry leading takeoff and  Roof Estimating Reports for professional construction contractors. Please Email : [email protected]

To find your roof’s total square footage: Measure the length and width of each plane on the roof (including dormers) then multiply length times width. Add the square footage of each of the planes together.
roofer
To calculate your roof area, simply multiply your roof length by your roof slope height, and multiply this by two. This should give you the total area of your roof, not accounting for a chimney or other sections of your roof not covered by tiles.
For a 1500 square foot house, you will need approximately 19 squares or 57 bundles or 1653 pieces of 3-tab standard-sized shingles (12 inch by 36 inch) when overhangs is 1 feet and roof slope is 4/12.
The angle, or pitch, of a roof is calculated by the number of inches it rises vertically for every 12 inches it extends horizontally. For example, a roof that rises 6 inches for every 12 inches of horizontal run has a 6-in-12 pitch.
 

What roof pitch is 30 degrees?

A 30° roof pitch is roughly the same as a 7/12 roof pitch.
Minimum thickness of a rcc roof slab is completely dependent upon the types of slab, may be One way or Two way slab or flat slab, Span of slab, Design load upon the slab. The minimum thickness of a slab is not less than 4 inch according to the indian standard.

Sky Roof Measure provides industry leading takeoff and  Roof  estimating Reports for professional construction contractors. Please Email : [email protected]

https://skyroofmeasure.com/
The normal thickness range for sheathing is 3/8 to 3/4 inch. Multiple factors should be taken into account when determining appropriate roof sheathing thickness, like the span of roof joists and snow load for the area.

Price of Roofing Shingles Per Square Foot

Roof AreaCost of Shingles
1,000 square feet$910 – $1,100
1,500 square feet$1,400 – $1,600
1,750 square feet$1,600 – $1,850
2,000 square feet$1,810 – $2,110

Looking for a Roof Measurement Report?

Please fill out the form below -