aerial roof measurement

Aerial Roof Measurements Are Now Easier

Aerial Measurement Technology

It extracts measurements that may have at an accuracy rate of 95% or higher. Contractors benefit from the time savings that come with not having to visit the property, as well as the added safety: it’s possible to gather the measurement with no climbing.

What is aerial roof measurement report?

The Roof Measurement Report provides a detailed analysis of your roof layout and all the critical dimensions. … This report saves your time and enables accurate roof estimates for a roof repair or replacement. This is a professional grade report used for use by licensed roofing contractors or insurance companies

How do I figure out how many square My roof is?

Roof surfaces are measured in “squares”. A roofing square is equal to 100 square feet of the roof. To determine the number of squares on the gable roof example in this post, divide its total of 2400 square feet by 100 (2400 ÷ 100 = 24).
 

Can you measure a roof from the ground?

If you’re planning work on a roof and don’t have the building plans, taking preliminary measurements from the ground allows you to approximate the roof area and estimate some costs. … But, you can measure a gable or flat roof from the ground with the help of an assistant.
 

How do you measure a roof for metal roofing?

Determine the length of the metal panels needed for one side of your roof by measuring from the fascia board (the board attached to your roof joists) to the ridge (the peak) of the roof. For example, your roof could measure 12 feet to its peak. This number will tell you the total length of metal panels needed.
 

How do I estimate roofing costs?

According to HomeAdvisor, the typical range for roof replacement costs is between $5,100 and $10,000, but roof replacement can be as low as $1,200 or as high as $30,000. Many roofing companies will charge between $3.50 and $5.00 per square foot.
ScreenshotGoogleEarth1-1

How do I get an accurate roof measurement?

Measure the width and length of each plane of the roof (including dormers), and then multiply those numbers to get the correct figure for the square footage of that area. Note any skylights, chimneys or other parts of the roof that would not require materials. You can subtract those measurements from your total area.

Aerial Measurement Technology

It extracts measurements that may have at an accuracy rate of 95% or higher. Contractors benefit from the time savings that come with not having to visit the property, as well as the added safety: it’s possible to gather the measurement with no climbing.

Can drones measure roofs?

Drones present a unique opportunity for getting a clear view of your rooftop and allowing you to get precise roof measurements. A variety of roof measuring applications and programs already take advantage of high-resolution drone imagery to get accurate roof measurements.

Can I see my house on Google Earth?

To find your own house:

Go to the search box on the top left and enter your address. Double-click your address in the search results. Google Earth will fly you to your neighborhood. Drag the Pegman icon to access Street View and get an up-close look at your home.
 

How do you measure roof lines on Google Maps?

  1. On your computer, open Google Earth.
  2. Search for a place, or select a location on the globe.
  3. On the left, click Measure. . …
  4. Click the map to set measurement points.
  5. To remove a point, on the right, click Undo .
  6. To complete your line measurement, double-click on your last point, or click Done .

How do laser measures work?

In a nutshell, laser measurement tools are based on the principle of reflection of a laser beam. To measure a distance, the device emits a pulse of laser in the direction of an object, for example a wall. The time necessary for the laser beam to get to the object and go back determines the measurement of the distance.
 

Are laser measures accurate?

The Accuracy of Laser Measuring Tools

Most construction lasers will be accurate to 1/8 or 1/16 of an inch. For basic estimating, a laser measuring tape with a 1/8-inch accuracy will work fine. And even if you don’t need to bump the tool up to 1/16-inch accuracy, longer-range models will have it available.
Artboard-1

Wall Measurement Reports for Siding

Aerial Roof Measurement Report

The Roof Measurement Report provides a detailed analysis of your roof layout and all the critical dimensions. … This report saves your time and enables accurate roof estimates for a roof repair or replacement. This is a professional grade report used for use by licensed roofing contractors or insurance companies. Follow Us for more details Please!

How do I get an accurate roof measurement?

Measure the width and length of each plane of the roof (including dormers), and then multiply those numbers to get the correct figure for the square footage of that area. Note any skylights, chimneys or other parts of the roof that would not require materials. You can subtract those measurements from your total area.
 

How do I figure out how many square My roof is?

Roof surfaces are measured in “squares”. A roofing square is equal to 100 square feet of the roof. To determine the number of squares on the gable roof example in this post, divide its total of 2400 square feet by 100 (2400 ÷ 100 = 24). This means you would need 24 squares of shingles to cover that roof.
 
Roofing Quote Footage is Not the Same as Home Square Footage

Depending on where the information is coming from is going to determine the basis on which the estimated roof footage is calculated. The roof square footage is what we (roofing contractor) need to calculate a budget quote to do the job.

How do I calculate how many shingles I need?

The most accurate way to calculate how many bundles of shingles you’ll need is to get up on the roof and measure each roof plane. If all the roof planes are rectangles, you simply need to multiply the length times the width of each plane to get the square footage; then you will add up the square footage of each plane.

Can you measure a roof from the ground?

If you’re planning work on a roof and don’t have the building plans, taking preliminary measurements from the ground allows you to approximate the roof area and estimate some costs. … But, you can measure a gable or flat roof from the ground with the help of an assistant.

How much does it cost to reroof a 1000 square foot house?

Average Cost to Replace a Roof by House Size
House (& Roof**) by Square FootRe-Roofing Cost*
1,000 (1,054)$4,000 – $5,500
1,100 (1,160)$4,200 – $6,000
1,200 (1,265)$4,500 – $6,500
1,500 (1,581)$5,500 – $8,000

How many bundles of shingles do I need for 2000 square feet?

60 bundles
 
The number of bundles or squares you need will depend on the surface area of your roof, and its pitch or slope. For example, a 2,000 square foot roof will require 20 squares or 60 bundles.
 
measure-height-3d-building-google-earth-pro

Creating Measurement Reports for Complex Roofs

Do roofers do roof inspections?

The best news is that this vital service is often offered freely by roofing contractors, or at least, at a reasonably low price. As a homeowner, it’s important that you take advantage of these no-cost/low-cost roof inspections, as catching problems early can save you lots of money and stress in the future. Follow our report details! 

What is a roof condition report?

The purpose of the roof condition report is to guide long-range planning. The roof condition report should explain the investigation methodology employed, the findings, the prioritized conceptual recommendations, and the probable cost of recommended repairs or replacements.

How long does a roof report take?

Between 45 minutes and 4 hours
 
How long does it take to inspect a roof? Most roof inspections take between 45 minutes and 4 hours.

What is a roof survey?

A roofing survey is carried out by professional roofing contractors, and is used to determine the condition of your commercial roofing or industrial roofing system. It’s used to identify any problems before they become much bigger issues, including: Ponding water – which can occur mainly on a flat roofing system.

Is it worth getting a roof survey?

The more in-depth the roof survey, the more it will cost. It’s definitely worth paying for an extensive survey if you are buying a property or haven’t had a survey done before. This will ensure every little part of your roof is up to scratch and will last for years to come.

Does a homebuyers report check the roof?

The Homebuyer Survey includes a visual inspection of all major indoor features including ceilings, roof, walls, and bathrooms, as well as permanent outdoor buildings and features including roofing, pipes, gutters, walls, windows, and doors.
 
Here are the four such benefits you can expect to reap when you stick to a proper roof maintenance schedule:
  • Damage Control. The avoidance of costly repairs is perhaps the biggest benefit of sticking to a rigid maintenance routine. …
  • Extended Roof Life. …
  • Energy Efficiency Boost. …
  • Healthy Living.

Why should I maintain my roof?

Maintenance increases the lifespan of your roof.

Your roof is constantly being exposed to all kinds of conditions, so it is very important that you provide your roof with maintenance to avoid major damages. This maintenance also lengthens the life of your roof.

What is considered roof maintenance?

An important part of roof maintenance is the routine cleaning, clearing and tidying of the roof and its related systems. Pay attention not only to roof shingles and flashing but other key components, such as eavestroughs, down spouts, installations (such as skylights, vents, chimneys, solar panels), and ventilation.
BluePrints_bolg

Simple Residential Roof Report

How to Write a Roof Inspection Report [With Templates]
  1. Communicate details in a way the homeowner can understand. …
  2. Create a separate roofing estimate. …
  3. Use the report as a marketing opportunity. …
  4. Use resources to build roof inspection reports. …
  5. Keep it professional.

What is included in a roof inspection?

A roof inspection examines wear and tear, estimates the lifespan of a roof, and recommends repairs if necessary. The inspector should be able to identify roof features that are unsafe or in poor condition. Please Click here to know more about us!

What is a roof report?

A Roof Report is a written report, that is issued by an individual or by a company that is a licensed roofing contractor, after a Roof Inspection has been completed on the roof of a home.

What is a roof condition report?

The purpose of the roof condition report is to guide long-range planning. The roof condition report should explain the investigation methodology employed, the findings, the prioritized conceptual recommendations, and the probable cost of recommended repairs or replacements

What does a roof adjuster do?

The insurance company sends an adjuster to your house to inspect your roof insurance claim, assess the damage, and determine what is and is not covered for your roof claim.

How do you assess a roof?

Exterior Inspection
  1. Step back far enough from the house that you can see the entire roof, and look for sagging or uneven slopes. …
  2. Look through binoculars to assess shingle condition. …
  3. Walk around the entire house. …
  4. Look at metal flashing around chimneys, vent pipes and sidewalls.

Roof Evaluation

The primary purpose of a roof assessment is to evaluate and identify the level of wear and tear of your roof. In doing so, you will learn whether repairs are needed to your roof. To determine if your roof has any damage or wear and tear, a roofer is looking for certain signals of indication on the roof.

How much should a new roof cost?

How much does a new roof cost? Many factors will affect the cost of roof replacement, but some general costs for a three-bedroom house may be: $6,000 to $10,000 to replace metal roofing with Colorbond$15,000 to $20,000 to replace an asbestos roof with Colorbond.
 

How long is a roof good for?

Slate, copper and tile roofs can last more than 50 years. Homeowners with wood shake roofs should expect them to last about 30 years, while fiber cement shingles last about 25 years and asphalt shingle/composition roofs last about 20 years, the NAHB found.
aerial roof measurement

A Quick Guide to Roof Measurements

Determine the square footage of one floor of your home. (For example, if you have a two-story home that’s 2,600 square feet, one floor would be 1,300 square feet.) Multiply this number by your most recent result to get the estimated square footage of your roof. (1,300 x 1.05 = 1,365 square feet.)

How do I measure my roof for metal roofing?

Determine the length of the metal panels needed for one side of your roof by measuring from the fascia board (the board attached to your roof joists) to the ridge (the peak) of the roof. For example, your roof could measure 12 feet to its peak. This number will tell you the total length of metal panels needed. Follow Us !
 
Average Cost to Replace a Roof by House Size
House (& Roof**) by Square FootRe-Roofing Cost*
1,000 (1,054)$4,000 – $5,500
1,100 (1,160)$4,200 – $6,000
1,200 (1,265)$4,500 – $6,500
1,500 (1,581)$5,500 – $8,000

How many square feet is a typical roof?

The average residential roof size in the US is about 1,700 square feet or 17 squares, although there are many larger homes with roofs that can be well over 2,000 sq. ft. or 20 squares. In fact, larger residential properties with garages can easily exceed 3,000 sq.
 

square feet

The roofs are measured in squares. 100 square feet is equivalent to a square in roofing terms. The roof of the average home is 3000 square feet. The measurement of your roof is easy to figure out.
 

What is the standard width of metal roofing?

The two most common widths are 26 and 36 inches. Other standard widths include 24 and 39 inches. When calculating coverage using the width and length of corrugated roofing, keep in mind that each piece will need to overlap by several inches.

What type of roofing is best?

Best Roofing Materials for Longevity and Durability
  • Asphalt Roll.
  • Built-Up Roofing (BUR)
  • Composite Asphalt Shingle.
  • Wood Shingle.
  • Wood Shake Shingle.
  • Standing-Seam Metal.
  • Clay or Cement.
  • Slate.

What color roof lasts the longest?

Both light-colored and dark-colored shingles can last longer if given the necessary maintenance. The only thing tested and proven about light-colored shingles is that they help us keep the indoor temperature cooler in the hot summer season.

Which roof lasts the longest?

Roofing material that lasts the longest are concrete, clay or slate tiles. These materials significantly outperform other natural products like wood shakes or any manufactured roofing materials including asphalt shingles and metal roofing. Although these materials have a good lifespan, they are not as durable.
roofer

How do you measure a roof?

To find your roof’s total square footage:
  1. Measure the length and width of each plane on the roof (including dormers) then multiply length times width.
  2. Add the square footage of each of the planes together.

What is the standard size of a roof?

Most roofing is sold by the “square,” enough to cover 100 square feet of roof area. Our sample house — a typical two-story, 2,300-square-foot house with a medium-pitch roof — has a roof area of about 1,500 square feet.

How do you measure a roof for shingles?

To estimate how many shingles you’ll need, first estimate the total square footage of your roof’s surface. To do this, measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane. Get to know more about us !
 

How many bundles of shingles do I need for 100 square feet?

However, the vast majority of shingles require only 3 bundles per 100 square feet. For most shingle types, you’ll need 3 bundles to make a square of finished roof, which is 100 square feet. If you have a roof area of 3000 square feet, you’ll need 90 bundles of shingles.

What’s the pitch of a roof?

Roof pitch (or slope) tells you how many inches the roof rises for every 12 inches in depth. An Example of a roof pitch would be a “6/12 pitch” which means that the roof rises 6 ” for every 12″ inward towards the peak (or ridge).
 
Roofing Quote Footage is Not the Same as Home Square Footage

Depending on where the information is coming from is going to determine the basis on which the estimated roof footage is calculated. The roof square footage is what we (roofing contractor) need to calculate a budget quote to do the job.

How many bundles of shingles is a square?

three bundles
 
So, most popular shingles are sold such that three bundles are needed to cover one square of roof area. But be careful — not all shingle brands are packaged three bundles to a square!

How do you estimate roofing costs?

Measure the square metre area of the roof you want replaced. The range of prices to replace your roof is: $50 to $95 per square metre. So multiple this rate against the square metre of the roof you want replaced.

What is the average square footage of a roof?

The average residential roof size in the US is about 1,700 square feet or 17 squares, although there are many larger homes with roofs that can be well over 2,000 sq. ft. or 20 squares. In fact, larger residential properties with garages can easily exceed 3,000 sq.
 
 
 
aerial roof measurement

Roof Measurement Online

 Begin Measuring Your Roof
  1. Frame your home back to the top shot. …
  2. Click the ruler icon on the left side of your screen.
  3. Switch the unit of measurement to feet.
  4. Click on a starting and stopping point, and you’ll get an estimated measure of distance.
  5. Start logging in your measurements.
To find your roof’s total square footage:
  1. Measure the length and width of each plane on the roof (including dormers) then multiply length times width.
  2. Add the square footage of each of the planes together.

Measure the base area of your property

That will be the roof base width. Then, measure the distance of the other side of the structure from the edge of the eave to the other. That will be the roof base length. Multiply those figures together to get an estimate of the base area for the roof structure.

What’s the pitch of a roof?
 
Roof pitch (or slope) tells you how many inches the roof rises for every 12 inches in depth. An Example of a roof pitch would be a “6/12 pitch” which means that the roof rises 6 ” for every 12″ inward towards the peak (or ridge). There are two suggested ways to measure a roof pitch. Follow Us!
 
Is a 4/12 roof pitch good?
 
Image result
 
As well, a slope of 4:12 is most commonly considered the lowest slope for “standard shingle installations”. Most manufacturer and industry recommendations require, or at the very least recommend, special underlayment or other considerations on roofs between 2:12 and 4:12.

Can drones measure roofs?

Drones present a unique opportunity for getting a clear view of your rooftop and allowing you to get precise roof measurements. A variety of roof measuring applications and programs already take advantage of high-resolution drone imagery to get accurate roof measurements.
Can drones measure distance?
 
Similar to the method for measuring height, a typical drone can also be used to give a “close-enough” distance measurement. On the screen of the controller, there is usually a reading for distance, and this would mean the distance of the drone from the controller, and presumably from where you are standing.

What is the linear feet of a 12×12 room?

Multiply the length times the width of the room to get the room square footage. 12 ft x 12 in/ft (width of the room) = 144 in. So the total linear footage of the 1 x 12 boards is found by multiplying 5 (boards) by 6 (feet) which equals 30 linear feet.
ScreenshotGoogleEarth1-1

How do I measure my roof for free?

Online roofing marketplace startup Roof (San Francisco, CA) has released a free satellite roof measurement tool. Sky Roof Measurement is designed to allow roofing contractors across North America to measure any roof in under five minutes with pinpoint accuracy directly from their desk at no cost.

                                                                                                          Call Us :  (315) 926-1777

 

To find your roof’s total square footage:

  1. Measure the length and width of each plane on the roof (including dormers) then multiply length times width.
  2. Add the square footage of each of the planes together.
aerial roof measurement

Are satellite roofing estimates accurate?

Get Accurate Measurements AND Estimates in Minutes: Satellites are more accurate than the most experienced contractor’s hands. You’ll get EXACT measurements of your roof with no human error. We’ll even provide an estimate for costs based on the average roofing materials

How do I measure my roof for metal roofing?

Determine the length of the metal panels needed for one side of your roof by measuring from the fascia board (the board attached to your roof joists) to the ridge (the peak) of the roof. For example, your roof could measure 12 feet to its peak. This number will tell you the total length of metal panels needed.
 
Metal Roofing Prices per Sheet
Roofing MaterialPrice Range (Per Sheet)
Steel$75 – $350
Stainless steel$400 – $1,200
Tin$300 – $1,500
Aluminum$150 – $600

How much of my roof is flat?

 

Image result
 
From an insurance point of view, most companies consider a roof to be flat if it – or more than 25% of it – slopes less than 10 degrees. That’s why you’ll often be asked how much of your roof is flat when applying for a flat roof insurance policy.

How do you calculate rafter length?

 
Image result
 
If you are calculating rafter length from the center of the ridge beam (as shown below), you will need to subtract half of the thickness of the ridge beam from the top end of the rafter. For example, if the ridge beam is 1.5 inches thick, subtract 3/4 of an inch from the overall rafter length.
 
BluePrints_bolg

How do you read a roof blueprint?

How do you read roof pitch on blueprints?

If you don’t want to do a lot of measuring, you can use your pitch calculation to get an estimated square footage of your roof: Once you have your roof’s pitch, divide the number by 12. (For example, if your roof’s pitch is 4 in 12, you would divide 4 by 12. This would yield 1/3.)
 
A General Approach To Reading Blueprints
  1. Think Big-To-Small. …
  2. Know That Drawings Aren’t Perfectly Coordinated. …
  3. Use The Latest Version! …
  4. Make Sure Drawings Are Stamped. …
  5. Orient Yourself First. …
  6. Refer Only To Structural Drawings For Actual Component Size, Type & Assembly.
How Many Roofing Shingles Do I Need?
  1. Measure the length and width of each plane on the roof (including dormers) then multiply length times width.
  2. Add the square footage of each of the planes together.

                                                                                                          Call Us :  (315) 926-1777

How do you read a roof truss?

The answer is a convention of the truss producing industry. Just remember the acronym: FIS. This stands for Feet, Inches, Sixteenths. So, for example, a dimension string that reads; 4-7-12 would be the dimension 4′-7 12/16” or 4′-7 3/4”.

What do symbols on blueprints mean?

Material symbols are used to represent materials or contents on floor plans, elevations, and detail drawings. Different symbols may be used to represent the same item on these drawings. The outline of the drawing may be filled in with a material symbol to show what the object is made of.
 

4 Tips for Reading Blueprints

  1. Begin with the title block. The title block is the first piece of information you’ll see in construction site plans. …
  2. Study the plan legend. …
  3. Find the blueprint’s scale and orientation. …
  4. Look for notes from the architect.

What are the 3 types of views in blueprint?

 
Image result
 
In essence, there are three basic types of perspective drawings that are commonly used in architectural design and construction: one-point perspective, two-point perspective, and three-point perspective.

Is it hard to read blueprints?

All construction professionals, regardless of whether they are working in the field or in the office, must know how to read blueprints. Blueprint reading is not terribly difficult but it does require practice and some basic knowledge of blueprints.

What does R mean on a blueprint?

Radius
 
The “R” represents a Radius, and usually on the print it will call out the size or full.

What are blueprints called now?

Image result
Are Blueprints Still Being Used? Blueprints are still being used to this day. However, they are no longer blue and aren’t called blueprints. They are now referred to as drawings or plans.

What is the purpose of blueprint?

A design blueprint is a high-level plan that guides collaborators through the process of designing and contributing to the development of an open course. Its purpose is to visualise the overall “architecture” of the course to guide the design, development, and cooperation process.
 
Tips on How to Read a Site Plan
  1. Find The Title Block. In the bottom right corner of most plans, you’ll find what’s called a title block. …
  2. Learn the Plan’s Scale. …
  3. Determine the Orientation of the Plan. …
  4. Know the Datum Point. …
  5. Note the Site’s Contours. …
  6. Locate Existing Structures.