Estimate Roof Size

Measure Roof From Satellite Free

Are satellite roofing estimates accurate?

Get Accurate Measurements AND Estimates in Minutes: Satellites are more accurate than the most experienced contractor’s hands. You’ll get EXACT measurements of your roof with no human error. We’ll even provide an estimate for costs based on the average roofing materials. Get to know more!
 

How to Calculate Total Square Footage of Your Roof

  1. Measure the length and width of each plane on the roof (including dormers) then multiply length times width.
  2. Add the square footage of each of the planes together.

How do I estimate the cost of a new roof?

The average cost to replace a roof can vary quite a bit. According to HomeAdvisor, the typical range for roof replacement costs is between $5,100 and $10,000, but roof replacement can be as low as $1,200 or as high as $30,000. Many roofing companies will charge between $3.50 and $5.00 per square foot.
 

Call Us for Roof Measurements : (315) 926-1777 

OR  Email us : info@skyroofmeasure.com

Can drones measure roofs?

Drones present a unique opportunity for getting a clear view of your rooftop and allowing you to get precise roof measurements. A variety of roof measuring applications and programs already take advantage of high-resolution drone imagery to get accurate roof measurements.
 

Can drones measure height?

While aerial photography is the most common use of a drone, many of the models available in the market are also capable of measuring height, the height of the drone above ground, or the altitude above the mean sea level.

How do you measure a roof with a tape measure?

With your measuring tape, measure vertically from the top point to the bottom point of your roof. (This is also called the rise.) Repeat this over 12 inches, then place the measurement over “12”. (For example: If your rise is 4 inches over 12 inches, then your slope measurement is 4/12.)
 

How many bundles of shingles do I need for 100 square feet?

Asphalt shingles are typically packaged with this in mind, but if a package of shingles covered an entire 100 square foot square, it would be too heavy to handle. So, most popular shingles are sold such that three bundles are needed to cover one square of roof area.

Leave A Comment

Your email address will not be published. Required fields are marked *