rooftop measurements

How do you measure a roof for satellites?

Tips:
  1. On your computer, open Google Earth.
  2. Search for a place, or select a location on the globe.
  3. On the left, click Measure. 
  4. Click the map to set measurement points.
  5. To remove a point, on the right, click Undo .
  6. To complete your line measurement, double-click on your last point, or click Done .
This study confirmed such measurement accuracy to distances over 2000 feet. 2. On-road, off-road, and curved path measurements from Google Earth Pro presented an average error rate of 1.45%, 1.61%, and 1.73%, respectively, to those obtained by manually rolled measurements for more than 1300 worldwide measurements.

Satellite Roof Measurement Reports: Fast, Accurate Roof Measurements Reports .As Low as $12

roof size calculator by address

Benefits of Satellite Roof Measurements

Using technology in Roof Measurements allows you to save valuable time in your business. Measuring by hand takes a long time because you need to measure the same more times to get precise results. So, this smart method helps you to do everything from measurement to sophisticated calculations without sacrificing accuracy. We deliver the reports at an affordable cost.

    • You’ll Save Hours: No baking in the hot sun all day as you fight your roof for positioning. A few clicks and you’re done. Use those hours to plan your DIY project instead.
    • You’re in Control. Not the Contractor: If you pay a contractor to take measurements, they’ve got all the leverage. They’ll choose labor and materials and make you pay for overhead expenses (plus a bit more to pad their pockets).
    • Get Accurate Measurements AND Estimates in Minutes: Satellites are more accurate than the most experienced contractor’s hands. You’ll get EXACT measurements of your roof with no human error. We’ll even provide an estimate for costs based on the average roofing materials.
  • It’s 100% Safe: Did we mention no ladders, measuring tapes, heights, or hot sun? Yeah, this is way safer!

Looking For a Roof Measurement Report?

Please Fill Out The Form Below -

https://skyroofmeasure.com/

How do you measure a roof for satellites?

In most cases, satellite and aerial roof measurement technology is 99% accurate, if you follow a few simple rules. Achieving accurate roof measurements manually isn’t any different. A manual roof takeoff by one roofer can easily vary from that of another.
Just measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane. Simply add the square footage of each of the planes together to derive the total square footage of your roof.
To find your roof’s total square footage: Measure the length and width of each plane on the roof (including dormers) then multiply length times width. Add the square footage of each of the planes together.
For a 1500 square foot house, you will need approximately 19 squares or 57 bundles or 1653 pieces of 3-tab standard-sized shingles (12 inch by 36 inch) when overhangs is 1 feet and roof slope is 4/12.
The average size of 12×12 shed roof is 3 squares, which typically requires 9 bundles of three-tab asphalt shingles or any other starter strips.
How many shingles do I need to protect my roof? The surface area of your roof will affect the number of bundles or squares you need. A 2,000 square foot roof requires 20 squares or 60 bundles.
Assuming your trailer’s outside walls are 10 feet high, you’ll have 140-square-foot trailer ends and 700-square-foot sides, for a total of 1,680 square feet. The cost to put in new vinyl siding on a 14 x 70 trailer cost ranges, at the time of publication, would start just above $3,000 and climb to $12,000 or more.
5/5
Unlimited roof measuring app

Satellite Reports: Fast, Accurate Roof Measurements Reports

In most cases, satellite and aerial roof measurement technology is 99% accurate, if you follow a few simple rules. Achieving accurate roof measurements manually isn’t any different. A manual roof takeoff by one roofer can easily vary from that of another.
Just measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane. Simply add the square footage of each of the planes together to derive the total square footage of your roof.
To estimate roofing materials, start by finding the total square footage of the roof and divide the number by 100 to determine the number of “squares” in the roof. Since it takes 3 bundles of shingles to cover a square, plan to purchase 3 bundles for each square. Then, add 10% to the number to account for waste.
Estimate the cost of a new roof online
For a 1500 square foot house, you will need approximately 19 squares or 57 bundles or 1653 pieces of 3-tab standard-sized shingles (12 inch by 36 inch) when overhangs is 1 feet and roof slope is 4/12.
For the number of ridge caps, multiply the length of the hip or ridge by twelve and divide it by five. This house is 1000 square feet. It requires 18 squares of shingles.
The more architectural details your roof has, the more planes you will have to measure. Measure each plane.Find the length and width of each plane.Then, multiply those two numbers together to find the square footage of that plane.

They generally range between $55 on the low end and $600 on the high end, with an average of $100 to $250 per square of architectural shingles.

Roof Shingles Cost per Square.

Number of SquaresCost (Including labor)
12 squares$2,400 – $6,000
15 squares$3,000 – $7,500
17 squares$3,400 – $8,500

Looking For a Roof Estimating Report?

Please fill out the form below -

Satellite Roof Measurement

Satellite Roof Measurement

Are satellite roofing estimates accurate?

In most cases, satellite and aerial roof measurement technology is 99% accurate, if you follow a few simple rules. Achieving accurate roof measurements manually isn’t any different. A manual roof takeoff by one roofer can easily vary from that of another.
 
SKY Roof Measure will reduce the need for on-site visits, giving roofing contractors a cost-saving, efficient way to provide excellent service to their customers. Other, comparable roof measurement products can take several days to generate a full report of roof attributes and can cost upwards of $100 per report or expensive monthly subscription fees. Roof’s new tool is completely free. 
  1. On your computer, open Google Earth.
  2. Search for a place, or select a location on the globe.
  3. On the left, click Measure. . …
  4. Click the map to set measurement points.
  5. To remove a point, on the right, click Undo .
  6. To complete your line measurement, double-click on your last point, or click Done .

Sky Roof Measure provides industry leading takeoff and  Roof Estimating Reports for professional construction contractors. Please Email : info@skyroofmeasure.com

Roof Dimensions Google Maps
Just measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane. Simply add the square footage of each of the planes together to derive the total square footage of your roof. For example, this flat roof has one roof plane.

Satellite Roof Measurements: Features of a Roof Report

  • Accurate Roof Pitch Measurements
  • Roof Measurements including AreaRakesRidgesHips and Valleys, and every edge is separately measured and identified.
  • CAD style drawings with colored lines identifying every type of roof edge
  • Online access to your Roof Reports for your Employees, Subs and Suppliers with no software to install
  • Multiple image providers for over 98% coverage of the USA & Canada
  • Also supports file formats such as XML,RXF,DXF/DWG AND WRL

Sky Roof Measure provides industry leading takeoff and  Roof Estimating Reports for professional construction contractors. Please Email : info@skyroofmeasure.com

aerial roof measurement

We Are Specialists

Our Satellite Roof Measurement Technologies produces roof charts wherein we take most extreme consideration of the multitude of subtleties like deterrents on roofs, accurate pitch estimation by seeing various appearances on Aerial Photos (East, West, North, and South) additionally lengths of the Eaves, hips, valleys, rakes, overhang, the space of every aspect and absolute space of the roof. Additionally, significance is given while appointing line ID as this is pivotal in planning roof outlines. For setting up the roof graphs we just need the location of the structure and we can give you the roof outline of the structure with definite precision. The estimations are taken from satellite and ethereal pictures that are regularly as, or more precise, than estimations taken from the site. We are comfortable working with Google Earth, BING, and Pictometry picture sources. Our twofold check quality methodology helps us giving quality yield to our clients.

The good news is there is a way to measure your roof in a safe and accurate way, all from the comfort of your home: use Google Earth. With just a few clicks, you can search for any address, get a bird’s eye view of your roof, and get the roofing measurements that you need.
https://skyroofmeasure.com/

How to Get Your Satellite Roof Measurements

You’re a few simple steps away from your aerial roof measurements (and a better back!):

    • Enter Your Details: Give us your name, email, and phone number so we can contact you.
    • Enter Your Address: Let us know which roof to measure.
    • Leave Notes: Tell us to exclude the garage or anything else we should know before sending your measurements.
  • Confirm Your Address: Hey, we just want to know we’re measuring the right house!

That’s it! Just proceed to the payment page (if necessary), and you’ll get your measurements instantly. See, wasn’t that way better than spending all day on the roof in the hot sun?

From there, you’ll create your free toolbox account where you’ll have access to your measurements and a ton of tools to make your roof project easier, cheaper, and faster. Or Just have a CLIK on our Email info@skyroofmeasure.com

Looking for a Roof Measurement Report?

Please fill out the form below -