How accurate are satellite roof measurements?
In most cases, satellite and aerial roof measurement technology is 99% accurate, if you follow a few simple rules. Achieving accurate roof measurements manually isn’t any different. A manual roof takeoff by one roofer can easily vary from that of another.
a2 = b2 + c2 – the square of the length of the hypotenuse (a) equals the squares of the lengths of the opposite sides of a right triangle (b) and (c). Given a2 we use our calculator to take the square root and bingo, we have the length of the sloping side of the roof.
How do you work out the square Metres of a roof?
To calculate your roof area, simply multiply your roof length by your roof slope height, and multiply this by two. This should give you the total area of your roof, not accounting for a chimney or other sections of your roof not covered by tiles.
How do you calculate the rise and run of a roof?
If you know the roof’s angle in degrees, you can find the roof pitch by converting the angle in degrees to a slope, then finding the rise by multiplying the slope by 12. First, find the slope by finding the tangent of the degrees, e.g. slope = tan(degrees). Then multiply the slope by 12 to get the rise.
Sky Roof Measure provides industry leading takeoff and Roof Estimating Reports for professional construction contractors. Please Email : info@skyroofmeasure.com
What is a roof square?
A roofing square is an area of roof that measures 10 by 10 feet to make up a total of 100 square ft. This critical unit of measurement helps your contractor determine how much material they’ll need to order for your roofing project, from underlayment to bundles of roof shingles.
How are roof sheets measured?
Multiply the effective length and width of the sheet to obtain the effective surface area. For example, if the effective width is 2.5 feet and the length is 7.5 feet, multiply 2.5 by 7.5. The result, 18.75 square feet, is the area each sheet will actually cover.
Looking for a Roof Measurement Report?
