measure-height-3d-building-google-earth-pro

Creating Measurement Reports for Complex Roofs

Do roofers do roof inspections?

The best news is that this vital service is often offered freely by roofing contractors, or at least, at a reasonably low price. As a homeowner, it’s important that you take advantage of these no-cost/low-cost roof inspections, as catching problems early can save you lots of money and stress in the future. Follow our report details! 

What is a roof condition report?

The purpose of the roof condition report is to guide long-range planning. The roof condition report should explain the investigation methodology employed, the findings, the prioritized conceptual recommendations, and the probable cost of recommended repairs or replacements.

How long does a roof report take?

Between 45 minutes and 4 hours
 
How long does it take to inspect a roof? Most roof inspections take between 45 minutes and 4 hours.

What is a roof survey?

A roofing survey is carried out by professional roofing contractors, and is used to determine the condition of your commercial roofing or industrial roofing system. It’s used to identify any problems before they become much bigger issues, including: Ponding water – which can occur mainly on a flat roofing system.

Is it worth getting a roof survey?

The more in-depth the roof survey, the more it will cost. It’s definitely worth paying for an extensive survey if you are buying a property or haven’t had a survey done before. This will ensure every little part of your roof is up to scratch and will last for years to come.

Does a homebuyers report check the roof?

The Homebuyer Survey includes a visual inspection of all major indoor features including ceilings, roof, walls, and bathrooms, as well as permanent outdoor buildings and features including roofing, pipes, gutters, walls, windows, and doors.
 
Here are the four such benefits you can expect to reap when you stick to a proper roof maintenance schedule:
  • Damage Control. The avoidance of costly repairs is perhaps the biggest benefit of sticking to a rigid maintenance routine. …
  • Extended Roof Life. …
  • Energy Efficiency Boost. …
  • Healthy Living.

Why should I maintain my roof?

Maintenance increases the lifespan of your roof.

Your roof is constantly being exposed to all kinds of conditions, so it is very important that you provide your roof with maintenance to avoid major damages. This maintenance also lengthens the life of your roof.

What is considered roof maintenance?

An important part of roof maintenance is the routine cleaning, clearing and tidying of the roof and its related systems. Pay attention not only to roof shingles and flashing but other key components, such as eavestroughs, down spouts, installations (such as skylights, vents, chimneys, solar panels), and ventilation.
roofer

How to Calculate Roof Area – DIY

Multiply your house length by your house width to get the area. (For example, 40 feet x 30 feet = 1,200 square feet.) Next, multiply the area by your roof’s pitch. (1,200 x 1.05 = 1,260 square feet.)

Calculate the exact roof area

Follow these steps to figure out the exact area of your roof:

  • Take your pitch number and divide it by 12. For example, if your pitch is 4 in 12, you need to divide 4 by 12. The answer will be 1/3.
  • Next, you need to square your outcome. In our example, 1/3 squared will yield 1/9.
  • Thereafter, add 1 to your result: 1/9+1=10/9
  • Calculate the square root of your new number: The square root of 10/9 is 1.05.
  • Measure the length of your house – including the overhangs.
  • Measure the width of your house – including the overhangs.
  • Multiply the length of your house by its width to get the area. For example, 40 feet x 20 feet = 1,200 square feet.
  • Thereafter, multiply the area by the pitch to get the true roof area: 1,200 x 1.05 = 1,260 square feet. 

In order to allow for ridges, hips, and waste, it is advisable to add 10% of your final roof area for a gable roof or 17% in the case of a cottage roof. Follow Us!

As a result, you should be working with 1,386 sq. feet or 1,474 sq. feet for a gable roof or a cottage roof respectively. Get to know more about us!

Roofing Terms — AskARoofer

Know Your Roof Type

There are three main types of roofs common on most of the homes in the Dallas area. There is the one-plained square or rectangle shed roofs that can be measured up in seconds. Another common roof is the gable which goes up one side, meets in a triangle, and then slopes down the back side. These are also easy to measure but involve a little bit of adding for the total square foot. Hip roofs are the third type and are a little trickier because they feature four triangle-typed shapes that angle up towards a central peak.

Get a Friend, Get On the Roof, and Measure Your Roof

The first way to measure your own roof involves physically climbing up with your tape and taking down the measurements. Roofs are measured in square foot so if you had a simple rectangle shed that was 12′ x 12′ you’d have 144 square feet you need shingled. Finding the square footage of a gable roof works in much of the same way, if the two plains are both 15′ X 30′ you’d have 450 square feet on both sides, or 900 square feet total.

Hip roofs require some geometric calculating to get the proper square footage. Generally hip roofs feature two trapezoids and two triangles. To calculate the area of a trapezoid you add the length of the bottom base plus the length of the top base and multiply it by the height. You take that number and divide it by 2 to get the area of one trapezoid base. The area of a triangle is calculated by taking the base multiplied by the height and dividing by two. Hip roof square footage is then figured by adding all the sides together.

Parts of a Roof & Roofing Terminology | S&K Roofing, Siding and Windows

Roofing Materials

The purpose of calculating the precise measurements of a roof is to ensure that the appropriate amount of roofing materials are ordered – whether you have a shingles roof, gable roof or metal roof. Here are some common roofing materials and considerations for each:

Shingles

Shingles are typically sold in bundles. Depending on the type and brand of shingle, it may take a different number of bundles to make a square. When cost comparing shingles, remember to base price on squares and not on bundles.

Metal Roofing

Metal roofing is typically sold by the sheet or panel. To determine the number of sheets or panels necessary to cover the roof, divide the width of the roof by the sheet or panel coverage width.

Other Roofing Materials

The basic square footage and length calculations detailed above should help estimate overall cost for other materials. Additional roofing materials that should be accounted for include items such as leak barrier, deck protection, drip edge, rake edge, ridge vents, and hip and ridge caps.

 

mid_sky-roof-measure1137960102

Aerial Roof Measurements, Roof Images

Aerial roof measurement report

The Roof Measurement Report provides a detailed analysis of your roof layout and all the critical dimensions. … This report saves your time and enables accurate roof estimates for a roof repair or replacement. This is a professional grade report used for use by licensed roofing contractors or insurance companies.
 

How do I get an accurate roof measurement?

Measure the base area of your property

That will be the roof base width. Then, measure the distance of the other side of the structure from the edge of the eave to the other. That will be the roof base length. Multiply those figures together to get an estimate of the base area for the roof structure.
 

How do I figure out how many square My roof is?

Roof surfaces are measured in “squares”. A roofing square is equal to 100 square feet of the roof. To determine the number of squares on the gable roof example in this post, divide its total of 2400 square feet by 100 (2400 ÷ 100 = 24). This means you would need 24 squares of shingles to cover that roof.
 

Can I measure my roof from Google Maps?

The good news is there is a way to measure your roof in a safe and accurate way, all from the comfort of your home: use Google Earth. With just a few clicks, you can search for any address, get a bird’s eye view of your roof, and get the roofing measurements that you need.
 
Average Cost to Replace a Roof by House Size
House (& Roof**) by Square FootRe-Roofing Cost*
1,000 (1,054)$4,000 – $5,500
1,100 (1,160)$4,200 – $6,000
1,200 (1,265)$4,500 – $6,500
1,500 (1,581)$5,500 – $8,000

What is the cheapest way to replace a roof?

Asphalt Shingles – The answer to what is the cheapest roof to install is asphalt shingles. This is the most commonly used and least expensive of roofing shingles.
 

Is it OK to reroof over old shingles?

Installing a new roof over shingles takes less time than tearing off the old roof. Looks just as good and lasts as long. As long as it’s done right and under the right conditions, installing new shingles over old ones can last as long and look just as good as a complete re-roof. Has the same manufacturer’s warranty.
 

How long does a 30 year roof really last?

The expected service life of a 30-year product, if properly cared for, is approximately 25 years. If it’s not cared for properly, that 30 year shingle will only last 12 to 15 years. That’s one of the big misconceptions in the roofing marketplace.
Roofing material that lasts the longest are concrete, clay or slate tiles. These materials significantly outperform other natural products like wood shakes or any manufactured roofing materials including asphalt shingles and metal roofing.
 
aerial roofing

Fast, accurate roof measurement

How Many Roofing Shingles Do I Need?
  1. Measure the length and width of each plane on the roof (including dormers) then multiply length times width.
  2. Add the square footage of each of the planes together.

The Roof Measurement Report provides a detailed analysis of your roof layout and all the critical dimensions. … This report saves your time and enables accurate roof estimates for a roof repair or replacement. This is a professional grade report used for use by licensed roofing contractors or insurance companies. The Roof Measurement Report provides a detailed analysis of your roof layout and all the critical dimensions. … This report saves your time and enables accurate roof estimates for a roof repair or replacement. This is a professional grade report used for use by licensed roofing contractors or insurance companies.

Call Us for Roof Measurements : (315) 926-1777 

OR  Email us : info@skyroofmeasure.com

Aerial Roof And Wall
Measurement Services

Get accurate roof measurements

  • Reduction of business costs
  • Integration with Job Nimbus
  • Sketch files available for Xactimate, Symbility and Autocad
  • Take offs based on your blueprints

Are satellite roofing estimates accurate?

Get Accurate Measurements AND Estimates in Minutes: Satellites are more accurate than the most experienced contractor’s hands. You’ll get EXACT measurements of your roof with no human error. We’ll even provide an estimate for costs based on the average roofing materials.

How do I estimate the cost of a new roof?

The average roof replacement cost is $4,200-6,600 on a 1,600 sq. ft. ranch house using asphalt roof shingles. However, if you use premium materials such as metal, wood shingles, clay tile, etc, the cost of your roof will be at least $9,500 – 16,000.
measure-height-3d-building-google-earth-pro

What Is An Aerial Roof Measurement Report?

The Roof Measurement Report provides a detailed analysis of your roof layout and all the critical dimensions. … This report saves your time and enables accurate roof estimates for a roof repair or replacement. This is a professional grade report used for use by licensed roofing contractors or insurance companies.

Ordering an aerial measurement report is a much faster and convenient way to get the measurements of a roof. Instead of climbing on a ladder to measure a roof for shingles by hand and inputting measurements into an estimate for the homeowner, the entire process can be managed digitally, saving you time and eliminating measurement errors. Follow Us for more details Please.

Aerial Reports uses the best of the industry’s Proven off-the-shelf software and available aerial imagery to provide Roofers, Contractors, Insurance Carriers and Adjusters a Customized, Detailed and Accurate Roof Measurement Reports. Never miss another opportunity to provide an estimate due to distance, location and weather conditions.

Call us : (315) 926 1777

Email: info@skyroofmeasure.com

Our aerial roof measurement reports are drafted by expert CAD technicians and reviewed by a quality assurance professional, certifying absolute data accuracy on every report. Precision is paramount at SkyRoofMeasure, and that’s how we guarantee a 95% or better accuracy rate on every plane, eave, rake, ridge, hip and valley.

See the source image

 

How to Manually Measure a Roof

To manually measure a roof without the help of aerial measurement reports, you must visit a job site and climb onto the roof to take precise roof measurements by hand.

  1. Measure the width and length of each plane of the roof (including dormers), and then multiply those numbers to get the correct figure for the square footage of that area.
  2. Note any skylights, chimneys or other parts of the roof that would not require materials so you can subtract those measurements from your total area.
  3. Add together the calculated square footage of each surface to get the figure for total square footage of the roof.
  4. After determining the total square footage of the roof, you must calculate the pitch of the roof by measuring the vertical distance (rise) over a 12 inch horizontal segment (run).
  5. Write down these numbers as the vertical measurement listed first and the horizontal measurement recorded second so you can find rise over run.
  6. When you have the total square footage and rise over run of the roof, you can calculate the roof squares to determine how much materials are needed to cover the roof. To calculate the number of squares on a roof, you need to divide its total square feet by 100.

With those figures, you can then estimate the roofing supplies needed for a job.

See the source image

How To Measure The Roof Using Google Earth

There are many great benefits to using Google Earth to measure your roof but nothing is as good as using DIY’s satellite roof measurement. The first of which is that you don’t even have to go up on the roof. This can make it even safer to do your measuring and it also removes a level of guessing to your calculation.

To begin with, you’re going to go to the app on your mobile device, or you will need to go to Google Earth on your laptop or desktop computer. There are many options here and you’ll want to select the one that allows you to enter the address. You can also zoom the map and click on the starting point of the roof you wish to select. After you’ve done this, you can click along the outer edge of the roof that you wish to calculate the area for.

See the source image

Roofing Measurements Using Google Earth

Each time you add points, the area will update and there is a box below that will convert this into acres, meters, kilometers, miles, and finally, square feet. It will also give you the perimeter of the shape of the roof.

Using this tool will be very helpful for you in finding out the acreage or the tract of land of your property. It will also give you the square footage of your roof and any other areas that you’re wanting to estimate. You can even embed this tool on a website that you own.

While these tools are very helpful, there are a few variables that you’ll want to know. If you’re in a rural area, you may have to go with the cross streets as the address may not bring up what you’re looking for. In such areas, you may wind up using the GPS coordinates or a landmark to get to where you’re going.

If you’re using the GPS, you’ll want to enter the latitude and then use a comma and enter the longitude. This will put you at a reference point that you can use to locate the facility or building that you wish to calculate the roofing on.

sky roof

Siding Buying Guide | Siding Measurement

Follow these steps for calculations you’ll use to learn how to measure for wood siding:

  • Measure height and width of each side. For each side, multiply height times width to get the total square feet.
  • Measure other areas not included in the sides, such as gables, dormers and more. For triangle areas, measure from the…
  • Measure the height and width of each window, door…

What Is a Roofing Square?

In roofing, one square equals 10 X 10 ft., or 100 sq. ft. This unit of measurement determines how many shingles you’ll need for every 100 sq. ft. of rooftop. As you prepare for your roofing project, you’ll use squares to determine the amount of roofing materials you need, from asphalt shingles down to the underlayment.

Call us : (315) 926 1777

Email: info@skyroofmeasure.com

How to Calculate a Roofing Square

Before beginning, make sure you can safely access your roof—if you can’t, contact a roofing professional for help.

Grab your measuring tape, level, pen and paper, roof safety equipment, and your ladder. With these in hand, you can measure your roof in five simple steps.

  1. Determine the number of planes. Your roof is made up of planes. If you have a flat roof, it has one plane. If you have a simple gable roof, it has two planes. The more architectural details your roof has, the more planes you will have to measure.
  2. Measure each plane. Find the length and width of each plane. Then, multiply those two numbers together to find the square footage of that plane. For example, a 35 ft. X 36 ft. plane = 1260 sq. ft.
  3. Find the total of all the planes. Add the square footage for each roof plane into one total. 1,260 sq. ft. + 1,260 sq. ft. = 2,520 sq. ft.
  4. Divide to find the squares. To find how many squares are on your roof, divide the total square footage of all your planes by 100. In our example, the total was 25.2 squares — 2,520 sq. ft. divided by 100.
  5. Remember the roof slope. Roof slope indicates how steep your roof is and may increase the number of squares of materials you need. Roof slope is calculated by determining how many inches a roof rises vertically for every 12 inches it extends horizontally. For example, if that vertical rise is 4 inches, the slope is 4:12.

You can use an online shingle calculator or roof slope calculator to help run the calculations. Once you know the total number of squares you want to cover, consider adding up to 10% in overage to account for error and installation.

STEP-BY-STEP GUIDE: HOW TO MEASURE A ROOF FOR METAL ROOFING INSTALLATION

It’s important to measure your metal roof before you begin your project so that you can estimate your metal roofing material as accurately as possible. Here’s our step-by-step guide for measuring the total roof area for installation:

Step 1: Start by sketching out a top-down view of your home’s roof. Don’t worry about getting the scale or dimensions perfect yet.

Step 2: Measure the length of your roof. Do this by measuring from one of the edges to the opposite side. Write down the number for the next step.

Step 3: Next, figure out the width of the metal that you’re installing. Then, divide the length of your roof by the width of the metal. For example, your roof’s length might be 30 linear feet (360 inches). Divide that by 24-inch standing seam roofing, and you get 15. This will be the number of panels you’ll need for one side of the roof.

Step 4: Repeat Step 3 for the other side of the roof. It’s important to measure both sides in case they slightly differ in size.

Step 5: Measure from the fascia board (board attached to the roof joists) to the ridge (peak) of the roof. This will determine the length of the metal roofing panels you’ll need for one side of the roof.

roof quotes online

Aerial Roof Reports

Gain the confidence you need to expedite critical projects without even having to set foot on the construction site. With aerial roof measurement reports from SkyRoofMeasure™, you can save both time and money. A project could be one roof, or multiple roofs; either way, these measurement reports have you covered. Gone are the days of scaling damaged roofs for more accurate measurements. Today, groundbreaking roof measurement systems precisely determine the dimensions of a roof.

How to Manually Measure a Roof

To manually measure a roof without the help of aerial measurement reports, you must visit a job site and climb onto the roof to take precise roof measurements by hand.

  1. Measure the width and length of each plane of the roof (including dormers), and then multiply those numbers to get the correct figure for the square footage of that area.
  2. Note any skylights, chimneys or other parts of the roof that would not require materials so you can subtract those measurements from your total area.
  3. Add together the calculated square footage of each surface to get the figure for total square footage of the roof.
  4. After determining the total square footage of the roof, you must calculate the pitch of the roof by measuring the vertical distance (rise) over a 12 inch horizontal segment (run).
  5. Write down these numbers as the vertical measurement listed first and the horizontal measurement recorded second so you can find rise over run.
  6. When you have the total square footage and rise over run of the roof, you can calculate the roof squares to determine how much materials are needed to cover the roof. To calculate the number of squares on a roof, you need to divide its total square feet by 100.

With those figures, you can then estimate the roofing supplies needed for a job.

Our Goal & Specialization

Our goal at Skyroofmeasure is to streamline your day to day operations by automating your employees and allowing them to work more efficiently with the help of our interactive Roof Reports. When your roof report is ready, it is not just emailed to one person, or available for download into a single desktop application, it is available to anyone in your company using a web based user account. All your reports saved on our database and you can view and download any time as per your convenience. Our 3D Roof reports include Aerial Images, rakes, flashing, valleys, ridges, multiple slope areas, pitch, linear measurements, total squares, recommended waste, etc. Our System can Export and import file formats such as XML,RFX,DFX/DWG and WRL.

aerial roofing

Accurate 3D Aerial Roof Measurements Reports

At Sky Roof Measure we create accurate 3D roof models from intelligent aerial images and generate a detailed PDF report. We generally serve Roofers and Insurance Professionals.

                                   Call Us +1 (940) 233-5566

We have extensive training and experience in the interpretation of aerial imagery and the creation of ACCURATE 3D roof models, our process includes; fetching aerial images > creation of the roof model > generation of PDF report.

We began producing 3d roof models from January 2010, we offer consulting services in regards to software selection and human resource training for other companies within the aerial roof measurements industry.

By combining multi-angle aerial images with advanced analytics, our reports provide precise area, pitch, and length measurements. Colour coding distinguishes every detail, from ridges, hips, and valleys to verges, eaves, and flashings. Fast report turnaround saves you time. High-resolution aerial views and 3D diagrams make your tender stand out.

Our roof measurement reports provide a detailed overview of every aspect of your roof. Each report comes with aerial images of the property, a 3D diagram of the roof, length, area, pitch and notes diagrams, as well as a summary page with waste table calculations. Our EagleView generated reports include length diagrams with color-coded details and total lengths for ridges, hips, valleys, rakes, eaves, flashing and step flashing. The Wall Measurement Reports provide a detailed analysis of your wall layout and all the critical dimensions, including the area each wall feature These professional-grade reports are used by all types national companies and come with an Accuracy Guarantee. All the measurement’s final report will emailed to you within 1-4 days.

Why Use Drones for Roof Measurements?

One of the main benefits of drones is their size and maneuverability.  This feature allows them to fly a few feet away from various building types and capture high-resolution imagery (sub-centimeter per pixel resolution) for residential, commercial, flat and metal roofs.

Features / Application / Technical Info.

    • 3D Roof Diagram
    • Aerial Images (Top, N, S, E & W)
    • Length Diagram
    • Pitch Diagram
    • Area Diagram
    • Notes Diagram
    • Report Summary
    • Waste Calculation Table

Aerial Reports is a quick and easy way to get detailed and accurate roof measurements anywhere you want without leaving your office. Aerial Reports uses the best of the industry’s Proven off-the-shelf software and available aerial imagery to provide Roofers, Contractors, Insurance Carriers and Adjusters a Customized, Detailed and Accurate Roof Measurement Reports. Never miss another opportunity to provide an estimate due to distance, location and weather conditions. Our off-site roof reports help you gain a Competitive Edge by providing an on-time and most accurate roof report. Simply provide us the address of the property to be measured and we’ll do the rest.

Our Goal & Specialization

Our goal is to streamline your day to day operations by automating your employees and allowing them to work more efficiently with the help of our interactive Roof Reports. When your roof report is ready, it is not just emailed to one person, or available for download into a single desktop application, it is available to anyone in your company using a web based user account. All your reports saved on our database and you can view and download any time as per your convenience. Our 3D Roof reports include Aerial Images, rakes, flashing, valleys, ridges, multiple slope areas, pitch, linear measurements, total squares, recommended waste, etc. Our System can Export and import file formats such as XML,RFX,DFX/DWG and WRL.

roof blueprint

Aerial View Roof Measurements

                         Call Us   +1 (940) 233-5566

Efficient, cost-effective roofing work depends on your ability to quickly and accurately gather measurements and assess the current roof condition. Improve your responsiveness to customers by replacing countless site visits with online roof measuring tools using recent aerial photos. Take traffic and safety risk out of the equation and produce fast, accurate quotes with the power of high resolution aerial maps. 

It’s quite a challenge to fly over the right location during the perfect window in time late winter or early spring. You want the capture to be snow-free, but must act quickly before the trees go green. You also need cooperative clear skies and adequate daylight – more difficult during short winter days. However detailed aerial capture plans may be, survey teams must still adapt on the fly and follow opportunity. You must learn to adapt quickly, and nimbly deploy aerial assets as opportunities present.

Take Chicago, for example – the time between last snow and first bloom can often be measured in days, or at best a few weeks. Clear weather aerial capture is difficult, but the ability for roofers to accurately measure what’s typically obscured by nature is essential.

roof measurements

Aerial vs. Satellite vs. Drones

There has been a move away from the satellite imagery that dominated measuring and site-surveying for the previous decade. There’s a couple of reasons for this, the main one being quality. No matter how good the camera on a satellite may be, it’s still in outer space. By being closer to the earth’s surface,  a high-quality camera on an airplane is going to capture a clearer, sharper image. 

What about imagery from a drone? With drone-captured imagery, you have the same problem you have with satellite captures, distance. Drone cameras historically have had wide-angle lenses, causing distortion of rooflines at low altitudes. We have no problem with drone-captured imagery, it’s often the best, and sometimes the only source for rural addresses that lack coverage by satellite and aerial imagery. To overcome the distortion, we suggest flying your drone to a minimum altitude of 400 feet. At that height, any visible distortion should be negligible, and you can make good use of your up-to-date drone imagery! That leads us to our next point…

Roofing reports

3D Model, Because Only a Good Picture is Worth a Thousand Words

Aerial imagery provides distorted, flat one-dimensional images that are often taken at a poor viewing angle. HOVER’s technology creates a highly accurate interactive 3D model of your project that streamlines communication on the job. Whether you’re pitching a prospective client, planning with your superintendent or installation group, HOVER’s 3D model is an invaluable asset for your entire process, from sales through completion.

Simply put, aerial measurements cannot compare to the accuracy and detail available with Sky Roof Measure’s timely, convenient features. Save time and money and surpass your client’s expectations when you base your projects on Sky Roof Measure measurements and models.

Satellite roof measurements

Remote Aerial Roof Measurement is Here Today

It’s true that the nail gun didn’t replace the hammer. That said, no professional is going to attempt to put on a roof without an air compressor nearby. The same can be said for measuring roofs from your desk… it’ll never replace a measuring tape completely but it sure gives you a head start. Please, take a moment to learn how Sky Roof Measure can improve your bottom line while keeping you off unprofitable roofs. Aerial roof measurements are here. Now is the time to save time, money, and allow your business to run at a much higher profit margin.