SkyRoof Measuring

Roof Measurements

by with No Comment Roof measurementSatellite Roof Measurement

What is the standard unit for roofing measurement?

A roofing square is a unit of measurement for calculating the size of a roof and is equivalent to 100 square feet. The larger unit is useful for calculating the amount of material needed for a roof. It’s common to calculate the size of your roof in “squares”, and then order an additional 15% in backup materials.

How do you calculate the rise and run of a roof?

Calculate the roof rise using the figures for unit rise and total run. Multiply your figure for unit rise by your figure for total run to get the total rise. Using the example, it would be six inches times 13 feet. The total roof rise in the example equals 78 inches.

How do I calculate a rise?

Subtract the difference in elevation between two points on a hill to calculate the rise. The elevation could be determined by an altimeter or you could use a topographic map. As an example, you might read 900 feet at the top of a hill and 500 feet at the bottom, so subtract 500 from 900 to get a rise of 400 feet.
 

What are the 4 types of slopes?

Slopes come in 4 different types: negative, positive, zero, and undefined. as x increases. The slope of a line can also be interpreted as the “average rate of change”.

How to measure your roof area from the ground

A more accurate way to calculate the area of the roof than using Google Earth is to get outside to estimate the roof pitch and the base area of the property. Using these two figures, we can get a good idea of the shingle roof’s square footage and estimate your asphalt shingles’ needs and costs. This DIY technique can be helpful, especially if you are not comfortable getting on your roof, or if you have limited access to it.

Ground measures only work well for a gabled roof, since there are usually just two main rectangular pitches to calculate area for. For more complex roof shapes, like hip roofs, you’ll need to work with a roofer or measure from on top of the roof itself to calculate its total area.

Roof Measurement Report :

The Roof Measurement Report provides a detailed analysis of your roof layout and all the critical dimensions. Our full color report provides the detailed lengths, pitch and areas of every surface plane and edge. This report saves your time and enables accurate roof estimates for a roof repair or replacement. This is a professional grade report used for use by licensed roofing contractors or insurance companies. You will receive the report in .PDF format by email within 1-3 days. Follow us!

REPORT INCLUDES THE FOLLOWING:

  • Images: 1 Orthogonal (overhead), 4 Oblique (birds eye), and 1 Street View (where available), all in full color.
  • Roof Measurements and Areas: includes Eaves, Rakes, Ridges, Hips and Valleys, and edges are all separately measured and identified.
  • CAD style drawings with colored lines identifying every type of roof edge and area for each plane/section.
aerial roof measurement

Sky Measuring Guide

by with No Comment Aerial Roof MeasurementRoof measurementSatellite Roof Measurement

Footage is Not the Same as Home Square Footage

Depending on where the information is coming from is going to determine the basis on which the estimated roof footage is calculated. The roof square footage is what we (roofing contractor) need to calculate a budget quote to do the job.

What is the standard size of a roof?

Most roofing is sold by the “square,” enough to cover 100 square feet of roof area. Our sample house — a typical two-story, 2,300-square-foot house with a medium-pitch roof — has a roof area of about 1,500 square feet.
 

Can you measure a roof from the ground?

If you’re planning work on a roof and don’t have the building plans, taking preliminary measurements from the ground allows you to approximate the roof area and estimate some costs. … But, you can measure a gable or flat roof from the ground with the help of an assistant.

Call Us for Roof Measurements : (315) 926-1777 

OR  Email us : info@skyroofmeasure.com

How do I figure out how many squares my roof is?

Roof surfaces are measured in “squares”. A roofing square is equal to 100 square feet of the roof. To determine the number of squares on the gable roof example in this post, divide its total of 2400 square feet by 100 (2400 ÷ 100 = 24). This means you would need 24 squares of shingles to cover that roof.
 

What does a 7/12 pitch mean?

30.26 degrees
 
For example a 7:12 roof pitch means that for ever 12″ of horizontal distance the roof will increase in height by 7″. … The following diagram will let you easily convert roof pitch to degrees; a 7:12 pitch equals 30.26 degrees.
 

What does a 9/12 roof pitch mean?

Question: What is a 9/12 roof pitch? Answer: 9/12 roof pitch equivalents roof rises 9″ in a length of 12″. 9/12 roof pitch angle = 36.87 degrees.

Save Time, Cover More Ground with Aerial Measurement Reports

Ordering an aerial measurement report is a much faster and convenient way to get the measurements of a roof. Instead of climbing on a ladder to measure a roof for shingles by hand and inputting measurements into an estimate for the homeowner, the entire process can be managed digitally, saving you time and eliminating measurement errors.

images-3

Quality roof measurements

by with No Comment Aerial Roof MeasurementRoof measurementSatellite Roof Measurement

How to Calculate Total Square Footage of Your Roof. To find your roof’s total square footage: Measure the length and width of each plane on the roof (including dormers) then multiply length times width. Add the square footage of each of the planes together.

Call us : (315) 926 1777

Email: info@skyroofmeasure.com

Aerial vs. Onsite Roofing

We are now at the point where we can give someone a home improvement estimate without having to lay a hand on the house.

This is because companies like SKY Roof Measure allow us to get a fully rendered and measured 3D model of any home simply by transforming photos taken with your smartphone. This has helped contractors and insurance carriers to become more efficient, reduce their costs, and minimize closing times all through an app.

The accuracy of onsite measurements is more accurate than a plane flying hundreds of feet higher. The aerial measurements are usually rounded to the nearest foot rather than the in-person measurements where they get down to the inch.

  • Problem solving

  • Review Measurements – Access all roof and siding measurements within the 3D model in their app or online. Or export via PDF, Excel, or other file formats. Design in 3D – Change the roof, siding, and windows using real materials from brands like GAF, JamesHardie, and Alside. See the finished project with their fully shareable 3D model.
roof quotes online

Measure My Roof

by with No Comment Aerial Roof MeasurementRoof measurementSatellite Roof Measurement

Measure the length of the roof at its base along one side of your house. Use a ladder, if necessary, to get the most accurate measurement. Measure along the roof’s angle to get the width of your first roof area. Multiply the length by the width to get the area in square feet. Follow us for more details please.

Sky Roof Measure provides accurate roof measurements in .esx format, for use with Xactimate, at affordable prices. We now also provide wall measurement reports in PDF format .

Call us : (315) 926 1777

Email: info@skyroofmeasure.com

Our service is quick and easy to use.  Sign up for a free account today and ordering is as easy as 1, 2, 3!

  1. Enter the address where you need a measurement on the home page, and confirm the location on the satellite map view.
  2. Choose the type of report you need – commercial or single family home and/or wall report – and add any special instructions.
    • Add your reference number or claim ID to the order for easy tracking.
    • Let us know if you have special requirements, such as including secondary structures on single family home orders.
  3. Confirm your order and checkout.  You can also order multiple reports on a single invoice including an entire campus. 

Most customers pay by credit card.  Let us know if you need to pay by check.

How to use the google maps area calculator tool to measure a roof

Special precautions must be taken when measuring the area of a roof. The images that appear on google maps are often at a slight angle, which combined with the angle of a roof can cause errors. For this reason it is best to outline the roof at points which are all at the same elevation. On a simple house for instance you would only click on the corners of the roof and not on any points along the peak as that would cause an error. After measuring the area of the footprint you can estimate the actual roof area based on the angle of the roof. Similarly if you using the area calculator tool to measure a roof with multiple levels, you should do the individual section separately. The google maps area calculator is not 100% accurate. Do not rely on this tool as your only resource in making important decisions.

How to Get Your Satellite Roof Measurements

You’re a few simple steps away from your aerial roof measurements (and a better back!):

    • Enter Your Details: Give us your name, email, and phone number so we can contact you.
    • Enter Your Address: Let us know which roof to measure.
    • Leave Notes: Tell us to exclude the garage or anything else we should know before sending your measurements.
  • Confirm Your Address: Hey, we just want to know we’re measuring the right house!


That’s it! Just proceed to the payment page (if necessary), and you’ll get your measurements instantly. See, wasn’t that way better than spending all day on the roof in the hot sun?

From there, you’ll create your free toolbox account where you’ll have access to your measurements and a ton of tools to make your roof project easier, cheaper, and faster.

Roof Measurement Companies

How do you measure a flat roof?

by Aerial Roof MeasurementRoof measurementSatellite Roof Measurement

Just measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane. Simply add the square footage of each of the planes together to derive the total square footage of your roof. For example, this flat roof has one roof plane.

              Call Us +1 (940) 233-5566

 

How do you estimate a flat roof?

Out of the total installation cost on a new flat roof, around 70% will be the cost of labor! The cost of installation starts at $5 – 5.5 per square foot, but can go up to as much as $7-9 per square foot, depending on roof size and complexity. This includes tear off, insulation and the new roofing membrane.
 

How many shingles do I need for a 24×24 garage?

Considering this, how many shingles do I need for a 24×24 garage? Three bundles are equal to one square. Each square equates to 100 square feet. In the previous example, three squares, or 300 square feet, of shingles will be needed to cover the garage roof.
 

What is the standard height of a roof?

10 to 12 feet
 
The standard height of a building’s roof is 10 to 12 feet.
 

Can you measure a roof from the ground?

If you‘re planning work on a roof and don’t have the building plans, taking preliminary measurements from the ground allows you to approximate the roof area and estimate some costs. … But, you can measure a gable or flat roof from the ground with the help of an assistant.
 

How do you determine the height of a roof pitch?

Pitch – Is the incline of the roof represented as the ratio of rise to the span (twice the run). For example, if the roof rises 4 feet and the span is 16 feet (twice the run), then the pitch is 4/16, or 1/4.
 

Is there a minimum roof pitch?

Traditionally, a minimum roof pitch of 20° was recommended in BS 5534, but modern tiles and slates have now been designed for applications as low as 15°. It is uncommon to find a roof below 15° but for those very low pitch applications, there are interlocking clay pantiles available, suitable for use down to 12.5°.
 

How much area does 1 pack of shingles cover?

Each bundle covers 33.3 sq. ft. of roof area—which is close enough to the 32 sq. ft.
 

What color roof is best for resale?

Coordinate with Siding and Shutters
House Siding Color:Best Matching Roof Colors:
WhiteBrown, black, green, gray, blue, red
GrayBlack, dark gray, dark blue, dark green, white
Beige/TanBrown, black, dark green, dark blue
BrownGreen, black, blue, charcoal and browns that are lighter or darker

How much does it cost to build a 30×40 garage?

The cost for straight wall metal garages starts at about $12 per square ft. Taking the roof into account, the cost of a 30’x40′ straight wall garage is about $14,400. Accessories and delivery will add another $3000 to this cost for a total estimate of $17,400

 

Do Metal Roofs affect WIFI?

Ultimately, investing in a new metal roof should have barely any noticeable effect on your home’s Wi-Fi network. Modern Wi-Fi systems are quite strong. As long as you have a newer modem and router, it should have no trouble supplying steady connections to the wireless devices throughout your home.

Looking For a Roof Measurement Report?

Please Fill Out The Form Below -

Satellite roof measurements

How to Measure a Roof

by with 4 Comments Aerial Roof MeasurementRoof measurement

If you’re determined to tackle a roofing job yourself, it will be important to calculate the exact square footage of your roof in order to know how much material you’ll need. After taking a few simple measurements, you can figure out the area of your roof by sketching a rough diagram and breaking the roof up into smaller sections, which you can then add together to get your square footage grand total. If getting onto your roof isn’t an option, you can also estimate its size from the ground by measuring the area of the exterior walls and multiplying that number by the roof’s slope.

Most roofing contractors typically measure a roof by calculating the area of a roof and then adding on 10% for possible waste. When roofing contractors are in high demand such as they are in Florida after a hurricane, this way of estimating a roof may be okay, but in a tighter market you may need to have sharper estimating skills in order to compete with your competitors and make a profit. Here I’ll show you how to get a quick, and highly accurate roof estimate on all types of roofs.

Before submitting a bid for any roofing job, you need to know what the materials will cost. In order to know how much materials you’ll need you must know the size of the roof. First you will need to measure the total area of the roof. Then you will need to measure the lengths of the ridges, rakes (gables), hips, valleys, & eaves. If the job is a new construction roof installation you may be able to get the measurements from the blueprints; however, if the roof is a roof replacement or roof repair then you will need to measure the roof yourself.

Slope

  1. You’ll also need to measure the slope, or angle, of your roof.
  2. To do this, position your ladder near the top point of your roof.
  3. With your measuring tape, measure vertically from the top point to the bottom point of your roof. (This is also called the rise.)
  4. Repeat this over 12 inches, then place the measurement over “12”. (For example: If your rise is 4 inches over 12 inches, then your slope measurement is 4/12.)

How to measure your roof area from the ground

A more accurate way to calculate the area of the roof than using Google Earth is to get outside to estimate the roof pitch and the base area of the property. Using these two figures, we can get a good idea of the shingle roof’s square footage and estimate your asphalt shingles’ needs and costs. This DIY technique can be helpful, especially if you are not comfortable getting on your roof, or if you have limited access to it.

Ground measures only work well for a gabled roof, since there are usually just two main rectangular pitches to calculate area for. For more complex roof shapes, like hip roofs, you’ll need to work with a roofer or measure from on top of the roof itself to calculate its total area.

Roof Measurements From Satellite

You’re a few simple steps away from your aerial roof measurements (and a better back!):

    • Enter Your Details: Give us your name, email, and phone number so we can contact you.
    • Enter Your Address: Let us know which roof to measure.
    • Leave Notes: Tell us to exclude the garage or anything else we should know before sending your measurements.
  • Confirm Your Address: Hey, we just want to know we’re measuring the right house!

That’s it! Just proceed to the payment page (if necessary), and you’ll get your measurements instantly. See, wasn’t that way better than spending all day on the roof in the hot sun?

From there, you’ll create your free toolbox account where you’ll have access to your measurements and a ton of tools to make your roof project easier, cheaper, and faster.