ScreenshotGoogleEarth1-1

How do I get an accurate roof measurement?

Measure the width and length of each plane of the roof (including dormers), and then multiply those numbers to get the correct figure for the square footage of that area. Note any skylights, chimneys or other parts of the roof that would not require materials. You can subtract those measurements from your total area.

Aerial Measurement Technology

It extracts measurements that may have at an accuracy rate of 95% or higher. Contractors benefit from the time savings that come with not having to visit the property, as well as the added safety: it’s possible to gather the measurement with no climbing.

Can drones measure roofs?

Drones present a unique opportunity for getting a clear view of your rooftop and allowing you to get precise roof measurements. A variety of roof measuring applications and programs already take advantage of high-resolution drone imagery to get accurate roof measurements.

Can I see my house on Google Earth?

To find your own house:

Go to the search box on the top left and enter your address. Double-click your address in the search results. Google Earth will fly you to your neighborhood. Drag the Pegman icon to access Street View and get an up-close look at your home.
 

How do you measure roof lines on Google Maps?

  1. On your computer, open Google Earth.
  2. Search for a place, or select a location on the globe.
  3. On the left, click Measure. . …
  4. Click the map to set measurement points.
  5. To remove a point, on the right, click Undo .
  6. To complete your line measurement, double-click on your last point, or click Done .

How do laser measures work?

In a nutshell, laser measurement tools are based on the principle of reflection of a laser beam. To measure a distance, the device emits a pulse of laser in the direction of an object, for example a wall. The time necessary for the laser beam to get to the object and go back determines the measurement of the distance.
 

Are laser measures accurate?

The Accuracy of Laser Measuring Tools

Most construction lasers will be accurate to 1/8 or 1/16 of an inch. For basic estimating, a laser measuring tape with a 1/8-inch accuracy will work fine. And even if you don’t need to bump the tool up to 1/16-inch accuracy, longer-range models will have it available.
satellite roof measurement

How Do You Measure a Roof Without Measuring It?

Roof surfaces are measured in “squares”. A roofing square is equal to 100 square feet of the roof. To determine the number of squares on the gable roof example in this post, divide its total of 2400 square feet by 100 (2400 ÷ 100 = 24). This means you would need 24 squares of shingles to cover that roof.

How do I calculate the size of my roof?

Multiply your house length by your house width to get the area. (For example, 40 feet x 30 feet = 1,200 square feet.) Next, multiply the area by your roof’s pitch. (1,200 x 1.05 = 1,260 square feet.)

 

How to Measure a Roof From the Ground

Measure out from the face of the wall below the fascia or rafter tails to a point that aligns with the outer edge of the roof. Multiply this measurement by the length of the roof from end to end, and add this to the first result. Double the result to determine the total area of the roof at both sides.

 

How do you measure the pitch of a roof from the outside?

To measure the roof pitch, you’ll need an 18- or 24-inch level, a tape measure, and a pencil. First, measure 12 inches from one end of the level and make a mark. Then, in the attic, place the end of the level against the bottom of a roof rafter and hold it perfectly level.

 

Is the square footage of a house the same as the roof?

Square Footage of Your Roof:

So a trick to estimate your roof size is to multiply the square footage of your house by 1.5 (ex: A 2,000 square foot house will have a roof that is approximately 3,000 square feet).

How much does it cost to reroof a 1000 square foot house?

Average Cost to Replace a Roof by House Size
House (& Roof**) by Square FootRe-Roofing Cost*
1,000 (1,054)$4,000 – $5,500
1,100 (1,160)$4,200 – $6,000
1,200 (1,265)$4,500 – $6,500
1,500 (1,581)$5,500 – $8,000

How much is a square of shingles?

Shingles are sold by the bundle and by the square. A square is equal to 100 square feet and will cost anywhere between $100 and $1,800. A bundle is around 1/3 of a square and costs an average of $30 to $600.
 

How many square feet are in a bundle of shingles?

33.3 sq. ft.
 
Calculating the number of bundles, you need is simple if you are using shingles that come three bundles to a square. Each bundle covers 33.3 sq. ft. of roof area—which is close enough to the 32 sq.

 

How much does it cost to tear off and replace a roof?

On average, it costs from $1.20-$4 per square foot to tear off and replace a roof with asphalt shingles. For a 1,700-2,100 square foot ranch-style property, that costs about $1,700-$8,400. However, roof replacement costs increase when you use higher-end roofing materials.